In Tumblast, a conveyor belt rotates inward, inside the blast chamber, and components are loaded onto it depending on the size and capacity of the machine. The door is closed. The rotor is turned on to launch shots or grains onto the components. Through this process, the loaded components obtain a universal finish. The abrasive media elevator continuously feeds abrasive media such as shot or grain. All dust extracted in the process goes into the attached dust collector. At the end of the desired time period, the door is opened and the conveyor belt is driven out. As a result, the components can be removed from the chamber. An automatic loading system can also be attached to the shot blaster/shot blast machine.
Tumblast blasting/blasting machines are available in many sizes, from a 2 cubic foot capacity machine to 15 and 20 cubic foot capacity machines. Some of the sizes are: 20″ x 27″, 20″ x 42″, 27″ x 36″, 30″ x 43″, 36″ x 42″, 42″ x 42″ and 48″ x 48″.
Similarly, Hanger model shot blasting machines are available in single/double door type, central suspension type and monorail type. In this model, the components are hung instead of being loaded onto the conveyor belt. The rest of the process is the same. The hanger rotates for a universal finish using multiple rotors depending on requirements. The advantage is that the components do not touch each other in the finishing process and are therefore not scratched.
Tilt table model shot blast machines are suitable for larger or heavier components or if smaller parts are to be shot blasted on one side only. Many sizes are available from a minimum of 36″ tabletop up to 120″ tabletop in single and double doors.
Continuous conveyor model shot blast machines are suitable for smaller components that are to be shot blasted on one side only with a single rotor. Multiple sides can be finished using multiple rotors. The components are fed on one side and withdrawn on the other side duly finished.
Spare parts used are mostly made of neither hard nor alloy steel for maximum service life. Major replacement parts include the rotor, blades, spring clips, cage and impeller, cage adapter, center plate, top segment, side liners, and round plates. as well as the conveyor belt. Few precautions are necessary during the operation of the machine.
The Tumblast model of shot blasting machine, if it is going to be used for finishing smaller components, is the most suitable and very cost-effective. We can be contacted with your component details for a suitable size and model of shot blasting machine.
More details can be seen at http://www.finishingmachines.com
